Sunday 23 September 2012

One step forwards....

Although work on it has slowed down since term started 'Where the Dead Live' is making progress.
I've made another batch of pringles (if in doubt start squishing paper!) and printed another set of etched pages.


I also finished the scanning for Rapunzel and put the textures into the image last week so I thought I'd print out the final artwork and start to put it all together. I'd decided to laser print the whole edition as the test pieces and mock up I did before the holidays (using found textures) worked well even though they weren't the right colours.

All the decisions have been made and this was meant to be the easy part. The printouts looked great. The colours and the textures worked well together. The dark  had a rich leather-like feel to it. But.....

when I started to fold the prints the ink started to flake off leaving white paper showing through




















It doesn't look worn and in keeping with the subject it just looks tatty.

I thought I'd print it on the inkjet instead. On printing paper it bleeds and the colours are decidedly grubby.


 So I ordered coated inkjet paper. It prints cleanly and the image is sharp but now the printer is resisting all attempts to calibrate it to the monitor and has decided it can improve on my colour scheme.


At the moment it favours custard yellow and something that can only be described as poo brown.




2 comments:

  1. Oh! Horrors! I hate it when machinery over-rides my instructions!
    Good luck with the calibrating. The prints look most intriguing.

    ReplyDelete
  2. It must be lovely to be at this point in the production of your books, but how frustrating it is when all these other factors slow you down. Hope all runs smoothly on your next attempt.

    ReplyDelete

I really appreciate hearing from you. Thank you for taking the time.